GRENOUILLE products can be purchased directly from Swamp Optics! See How to Buy for details and contact information.


GRENOUILLE received the 2005 Circle of Excellence award as one of the twenty-five most technically innovative optics products of the year!



GRENOUILLE's design was recognized with a prestigious R&D100 Award

GRENOUILLE Specs for Models Supporting
Ti:Sapphire and Solid State Lasers

Notes

  • Spatial chirp is accurately and easily revealed by tilt in the otherwise symmetrical measured trace.
  • Pulse-front tilt is accurately and easily revealed by a displacement of the trace along the delay axis.
  • Absolute wavelength is determined to a few nanometers by the accurately calibrated crystal angle dial.
  • GRENOUILLE is a second-harmonic generation (SHG) FROG, and hence has an ambiguity in the direction of time, but this one-bit ambiguity can be removed using any of several simple methods.
  • Feedback on measurement quality is obtained from the retrieved trace (as well as additional optional marginal measurements). Only FROG offers these assurances that a measurement is absolutely correct.
  • The input-beam mode quality should be good, and the spatial profile measurement helps you to ensure this.
  • Single-shot measurement is available without modifying the device.
  • Finally, GRENOUILLE is so easy to use that even aligning your beam into it involves an amazingly simple (~10 minute) procedure.
 

Get the Brochure

Click the button below to see the GRENOUILLE brochure in Adobe PDF format.


Need to Measure IR-range pulses?

Our GRENOUILLE Models 10-100 and 15-100 operate in the micron (IR) range and support fiber and telecom lasers.

See our page for Fiber and Telecom GRENOUILLE models for specs and brochures.


Have a Question?

If you have a GRENOUILLE question, it may be answered on our Frequently Asked Questions (FAQ) page.

See the GRENOUILLE & FROG part of our FAQ.

Copyright © 2003-2009 Swamp Optics, LLC. All Rights Reserved.